|
FREE
CATALOG ABOUT NYI NYI COURSES NYI ON-LINE NYI HOME |
How to Photograph Fireworks
- or - Have Fun on the Fourth of July |
Editor's Note: When we first ran "How To Shoot
Fireworks" little did we know it would become one of our "Top Ten" most
requested "How-To" Articles. Because so many people want to learn how to
handle photo opportunities that revolve around the most "photogenic"
holidays- Fourth of July, Halloween and Christmas, we're happy to rerun
this article- our tips on how to get the most color in your Fourth of July
photos, regardless of what type of camera you use.
|
|
Actually, getting good pictures of fireworks is pretty
easy. At bottom, there are only two fundamental requirements:
Fundamental 1 - A Time Exposure. A skyrocket takes time from the moment it's launched until the last burst of its color fades. As the rocket sails skyward, the crowd has time to exclaim "Ooh!" Then as it explodes in a burst of trails of color, the crowd has time to exclaim, "Ahh!" From launch to fadeout takes a few seconds. Your exposure, therefore, should be long enough to capture part, or all, of this time consuming progression. How long should your exposures be? At least one second long, some two seconds, and some even longer. How can you accomplish that? We'll take up that question shortly. There's another reason for a time exposure. As bright as fireworks look to us against a dark sky, they are not so bright that most films can record them in a blink of an eye. If you were to set your exposure for, say, 1/500th, not only will the lens be open for only a fraction of the rocket's progression, but the exposure may also be too brief to record any image at all! How long is long enough? With ISO 100 or faster film, a one-second exposure should be sufficient. The best way to tackle a long exposure will depend primarily on what kind of camera you're using. Let's examine how this works with different types of cameras. SLR Cameras It's easy for you to select a long exposure time using an SLR (single lens reflex) camera. If you're using a manual model, you can select a long exposure time by setting the shutter for 1-second or by using the B (or bulb) setting. With auto exposure cameras you may be able to select an even longer exposure such a 2 or 4-seconds. Point-and-Shoot Cameras What if your camera can't be set to take time-exposures? What if you are using an auto-everything point-and-shoot that gives you no control of exposure? Our advice: Try it. Your camera's electronics may automatically keep the shutter open long enough for a good time-exposure. Or it may not! We suggest you try this test in a similar situation requiring a time-exposure, long before the Fourth, so that you'll know the answer in time for that fateful date. Bear in mind that if you're using a digital point-and-shoot model, you may be able to control your aperture and shutter speed. For more on this topic, check out the companion article Shooting Fireworks with a Digital Camera. Single-use Cameras What if you will be using a single-use "cardboard" supermarket camera? You probably won't be able to capture the fireworks with it. The shutter on most of these cameras just won't stay open long enough. (The possible exception, according to Kodak, is a single-use camera loaded with ISO 800 film. Kodak claims that this film will be sensitive enough to pick up the firework colors even though the exposure is relatively short.) With any slower film in a single-use camera, be prepared to shoot lots of "crowd" pictures and other "ground-based" pictures. You'll find lots of action all around you, and fireworks are only part of the celebration. Who knows? You may get the best photos of all! Fundamental 2 - A Solid Platform. Regardless of your camera, the second requirement is a solid platform to hold the camera motionless during the time-exposure. This is pretty much a requirement for all time-exposures. Obviously, the best platform of all is a tripod. It provides a solid, easy-to-carry base on which to hold the camera motionless during the exposure. It also allows you to easily position the camera at the proper elevation. All SLR's and some point-and-shoots have a threaded opening on the bottom that permits you to attach the camera to a tripod. Single-use "cardboard" cameras do not. (In a moment we'll give you some ideas on how you can still take the necessary time exposures.) A tripod is just the beginning. You also want the camera to be as vibrationless as possible during the time-exposure. Since pressing the shutter button can cause the camera to vibrate, you can avoid this by also using a cable release. The cable release enables you to press the shutter button without touching the camera directly. Result: It helps minimize camera shake. Advanced Hint for the SLR purist! For the ultimate in steadiness, on some professional SLRs you can lock the mirror in an up position. Why do this? Because when you take a normal picture with an SLR, the mirror snaps up during the moment of exposure, then snaps back so you can set up the next shot in the viewfinder. When the mirror snaps up, it causes the camera to vibrate for a moment. While this vibration is usually tiny, if you're a purist and want the steadiest possible time-exposure, you can eliminate this vibration totally by locking the mirror in its "up" position. Of course, you can't frame the next shot in the viewfinder if the mirror is locked up. But this may not be so big a problem as it seems. After all, typically, fireworks appear in only one specific segment of the sky, so once you've aimed your camera-on-tripod in that direction and framed the shooting area, you can lock the mirror up unless you have to reframe for different shots. Back to basics: If you don't have a tripod handy (or you're using a camera that doesn't have a tripod thread), don't give up. Try placing your camera on a makeshift solid platform, such as a fence post, a railing, or a wall. None of them is as steady or convenient as a tripod, but they're infinitely better than hand-holding. Try using duct tape to secure a one-time use camera to a steady surface. A word of warning: If, by any chance, you are on a rocking boat, your tripod or the ship's rail or whatever you use as a "platform" will rock along with the boat. Result: In your time-exposure the firework color-streaks will come out rocking and wavy instead of straight. This may be interesting modern art - though we doubt it! - but it's definitely not good firework photography. It won't look right! Our advice: If you are on a rocking boat, don't bother to photograph the fireworks. It's a waste of time. Now to a few specifics: Camera Frame. Which way should you hold the camera? Typically, you'll be better off with a vertical format rather than horizontal. After all, the trail of a skyrocket is usually upward and not very wide. However, a final decision about the frame you use will also depend on the size of the crowd viewing the event, your position, and the number of spots from which the fireworks will be deployed. For example, in New York City, Macy's Department Store has sponsored the Fourth of July fireworks display. The shells are launched from a string of barges in the East River that's almost a mile long. That means you might be able to fill a horizontal frame with six or more bursts at one time, so it would probably be a better choice than a vertical one. Focal Length. What focal-length should you use? If you're close to the display, and if you have a choice, go for a "normal" or slightly wide-angle lens. Since your position relative to the rocket bursts will determine the exact focal length, use this as your guide: You want the frame of your image to extend so that it includes a good bit of the foreground in the bottom (more on this in a moment) and a "head-room" above the topmost firework trails. Chances are you'll need at least your normal and possibly a wide-angle setting for this. If, on the other hand, it's a world-class display that draws a "world-class" crowd, you may be further away from this display and need to use a longer focal length. Aperture. What aperture should you use? You might think that because the sky is so dark you need a wide aperture. Just the opposite is true. Remember, your objective is not to record the dark sky except as background. You want to record the intensely bright streaks of color. Were you to use a wide open aperture during your time-exposure, you would probably overexpose the colors. Result: They would "burn out" and lose coloration. To intensify the color, therefore, use a smaller aperture like f/8, or f/11, or even f/16. Which you should use depends upon the speed of your film and the intensity of the color bursts. We suggest you bracket your shots, using different apertures. Focus. Where should you set focus? Set your lens for infinity. If your camera is an autofocus model, trust the camera to automatically focus on infinity, but the dark sky may cause trouble. As an alternative, you can set the camera on manual focus. Film. What film should you use? Probably any film you ordinarily use will do the trick. Typically, grain is not a problem in this type of image. We recommend that you use ISO 100, 200, or 400. The important point is that you don't need a very fast film; in fact super-fast films may overexpose the firework display. And very slow films - for example, ISO 64 - may not be sensitive enough to capture the display. (Remember, while your shutter will be open for a second or two or more, the actual appearance of the "rockets red glare" will last only a fraction of a second in any one place.) Flash. Should you use flash? No. Not ordinarily. (In a moment, we'll discuss when you might want to use flash.) Ordinarily, turn off your flash. The fireworks themselves provide all the light you want. If your camera cannot be controlled and the flash goes off whether you like it or not, try covering the flash with your hand or a piece of tape so that the camera doesn't "see" it. How many frames should you shoot? Expect to shoot lots! Every burst is beautiful - and you can't predict which one will be the "most beautiful." So your tendency if you're like the rest of us, will be to shoot lots of film. This means that you should be prepared to change rolls of film quickly and in the dark. Our advice is to burn lots of film - a few rolls, at least - and if you want to save money, do so during processing, as follows: Ask your photofinisher to make contact sheets or index prints, but not print each image. Then, from the thumbnail images select the few best shots that you want printed. Another way to save money: While shooting, be aware that most firework displays have a rhythm that usually ends in a multiple burst of glory. If you want to limit the film you shoot, hold back for this Grand Finale. But be wary. It may happen before you realize it...and then it's too late! So be sure you're ready for it. If the fireworks have a musical accompaniment - like Tschaikovsky's 1812 Overture - you can hear it coming. But often, you can't anticipate the Finale, so we can only admonish you to follow the Boy Scout motto - Be Prepared! Foreground Subjects with Fireworks Now, there's an additional step to consider that can take your pictures out of the ordinary and make them extra-special. The burst of a skyrocket, by itself, is pretty. But it's not particularly interesting. What can you do to add interest? Try this: Don't just shoot the burst by itself, but shoot it in conjunction with something else. For example, look how much more interesting this picture is because the paths of fireworks are incidental to this picture of the Capitol Building. Since you may not have the Capitol in your area - or even its equivalent - what can you use to add similar interest? Consider including a statue in the foreground, with the fireworks framing it. Or silhouettes of the onlookers to give a sense of location to your picture. Or a tree. Or a building. Or a bridge. Or a skyline. Or...you fill in the blanks. The important thing is that your image include some interesting foreground objects - perhaps, framed within the fireworks display. One trick you may want to try is to use flash to light the foreground object. Now, we realize we just told you NOT to use flash, but here's the special case we warned you was coming. Let's say you want to capture the statue of George Washington or some other interesting object that's in the foreground, and that object is in the dark. How can you add light to the statue during your exposure? Your strobe may do the trick. Put your camera on Manual control if possible. Set up on the tripod as already explained. But in this case, focus on the statue instead of infinity. With a wide angle lens, if the statue is 15 or 20 feet away, you will get infinity within your depth of field. If the statue is closer, the fireworks may not be sharply in focus, but this lack of sharpness is probably acceptable because the fireworks are streaks of light and color, rather than detailed objects. Set your strobe to go off during the exposure. The flash will light up the statue for an instant, but will not affect your time exposure of the sky. That's the theory, at least. But there may be some problems depending upon your specific equipment. Will the statue be overexposed because the strobe is too powerful, and the shutter is manually set for two seconds? Or will the strobe turn itself off when the statue is properly exposed regardless of how long the shutter is open? Some strobes will - some, will not. Another possibility: Will the strobe "force" the shutter to close prematurely, sooner than you intended? Again, the answer depends upon the particular equipment you use. If you are not sure (for which you are not to blame - most camera and strobe instruction manuals don't tell you), we offer these suggestions. First, bracket your shots. Try different exposures, and select the best shots when you get them back. Second, consider removing the strobe from the camera (if you can) and handhold it facing toward the statue. Press the shutter button to start your time exposure, and immediately press the Test button on the strobe to get it to flash. In this configuration, the strobe is not connected to your camera so it cannot "force" the shutter to close prematurely. If you have an assistant, you may even have that person walk up toward the statue holding the strobe, and setting off the flash when you give the signal. In any event, don't forget that your flash has a limited range. It's not going to light up those mountains on the horizon! Know its limitations, and use it - if at all - to add a bit of light to foreground objects. Of course, if your subject, like the Capitol Building, is lit by artificial light, you can let that light do the work for you. Let's say that statue of George Washington is floodlit. You probably are better off not using your flash. Let the floodlights light up old George during the time exposure. How do you know if you will get enough light or too much? Typically, you won't. So our advice is to stand back far enough from the lighted statue to avoid gross overexposure - and then bracket your shots. Back to basics: Whether you're advanced or not, there's one more "trick" for you to consider. Why limit yourself to just one rocket's glare? What about keeping your shutter open long enough to capture the glare of a few rockets exploding in air one after the other. To accomplish this, experiment with longer time exposures - ten seconds, 20 seconds, and even longer. You can get some dazzling results! To sum up, don't let any of the complications examined in this article discourage you. At bottom, firework pictures are easy to take and make great photographs. Just remember the two Fundamentals: 1) Take a time exposure, and 2) Use a tripod. If you're an average photographer and do just this, you'll get some outstanding photographs on the Fourth of July. Be sure to read these new fireworks photography articles! Go to NYI's "Shooting Fireworks with a Digital Camera" Go to NYI's "Photographing Fireworks in Your Backyard" |
211 East 43rd Street, Dept. WWW New York, NY 10017 U.S.A. info@nyip.com For permission to reproduce in any manner, see Notice on Home Page. |